Mechanical and microscale characterization of foamed concrete with Tianqi aluminosilicate binder

Simple item page
dc.contributor.authorSattar, Afiya Abdul
dc.contributor.authorMydin, Md Azree Othuman
dc.contributor.authorNadimalla, Altamashuddinkhan
dc.contributor.authorAbdullah, Mohd Mustafa Al Bakri
dc.contributor.authorAwoyera, Paul O.
dc.contributor.authorFadugba, Olaolu George
dc.date.accessioned2025-12-18T14:48:36Z
dc.date.available2025-12-18T14:48:36Z
dc.date.issued2025
dc.description.abstractPersistent research work has aided the development of supplementary cementitious materials, contributing to both sustainable development and mitigating environmental impacts. This study utilized Tianqi aluminosilicate (TAS) as partial replacement for Ordinary Portland Cement (OPC) in foamed concrete (FC) mix. The mechanical, transport, and microstructural characteristics of the concrete were explored. The formed concrete mixes were developed by varying TAS from 0 to 40%, in steps of 10% for OPC to identify optimal performance. The mechanical characteristics (compressive, flexural, splitting tensile, and elastic modulus) improved by 18–25% over control and peaked at 20% TAS. At 20% TAS substitution, the transport properties (water absorption and permeability) improved significantly, which corresponds to 35% and 28%, reduction, respectively. SEM analysis revealed that TAS refined pore structure, yielding a denser matrix with homogeneous hydration product distribution. The result revealed foam stability and uniformity in mixes containing TAS, and an improvement in mechanical and durability of the concrete. Filler effect and pozzolanic activities of TAS were identified as two key factors responsible for the observed results. There was pore refinement improved secondary hydration in the concrete matrix. The results show that 20% TAS substitution improves strength and durability while lowering OPC use and striking the ideal performance balance. From the results, TAS proved to be a sustainable supplementary cementitious material aiding the durability of the mixes. This work advances eco-friendly construction practices by demonstrating TAS’s viability in high-performance FC applications.
dc.identifier.citationSattar, A. A., Mydin, M. A. O., Nadimalla, A., Al Bakri Abdullah, M. M., Awoyera, P. O., & Fadugba, O. G. (2025). Mechanical and microscale characterization of foamed concrete with Tianqi aluminosilicate binder. Scientific Reports, 15(1), 37442.
dc.identifier.issnhttps://doi.org/10.1038/s41598-025-21184-2
dc.identifier.urihttp://hdl.handle.net/20.500.12493/3049
dc.language.isoen
dc.publisherScientific Reports
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 United Statesen
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/us/
dc.subjectTianqi aluminosilicate
dc.subjectFoamed concrete
dc.subjectMechanical properties
dc.subjectTransport properties
dc.subjectSustainable construction
dc.titleMechanical and microscale characterization of foamed concrete with Tianqi aluminosilicate binder
dc.typeArticle

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
s41598-025-21184-2.pdf
Size:
4.3 MB
Format:
Adobe Portable Document Format
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Faculty of Engineering, Technology, Applied Design & FineArt (FETADFA)